After each use steam iron, iron inside the water should be drained first, and then plug in the power supply to run for a while, so that water is discharged completely, which is to protect the soleplate and prolong life is a very necessary step.
Iron floor often due to improper temperature ironing surface adhesion layer of char, you want to be promptly removed, otherwise piled up, the impact of ironing results. Available cleanser or scrub cuttlefish bone dampened with water, must not use metal hard object to scratch, so as not to scratch the plating layer. When ironing is completed, should be allowed to naturally cool iron, not splashing water to cool. Thermostat iron after use, should set the thermostat knob in the "off" or "cold" position, to avoid internal elastic deformation of metal parts for a long time aging. For spray-type steam irons, water level glass box if found to have cloudy or white powder found in the exhaust hole to fall, the available 50% white vinegar and water injected into each tank, heating a few minutes cleaning. After completion of pouring vinegar wash, but also the application of water to wash a few times. When not stored, the button should be steam, the steam discharge point button "OFF" position to avoid deformation of the spring.